igo for Becker and speed camera sounds

[eauto]

I would like to mute speed cameras on the Becker 7sl but there is no separate control for them. My question : which entry in data is responsible for this and which one could I use in sys

[mondo]

[warning]
speedcam_enabled=0
speedcam_warning=0

[eauto]

I mean specifically to lower the sound by half, what parameters to set, because there are two zeros.
the reason for my problem is the transport of people, at night when they sleep, the sound wakes them up
This sys entry causes the sound to be turned on and off as I understand it. This option exists in navigation.
I need to reduce the volume of the speed camera signal by half

[eauto]

in Date there is this entry:
[warning]
is_spoken=0
speedcam_warning=0
speedcam_soundtype=0
speedcam_visualtype=0
speedcam_continuous_approach_beep_when_tonal=0

warn_distances="130:1000,90:690,70:540,50:380,30:230"
approach_beep_distances="115"
speedcam_soundtype_3=1
overspeed_min_speech_repeat_delay=-1
overspeed_min_tone_repeat_delay=16
truck_max_speed_warn=100
use_truck_max_speed_warn=1
speedcam_warn_also_on_invalid_speed_limit=1

speedcam_max_angle=45
speedwarn_toltype=1
speedwarn_alt_toltype=1
speedwarn_alt_builtup_based=1
speedwarn_tolerance_type="fix"
speedwarn_alt_tolerance_type="fix"

I don't know who controls the volume

[mondo]

[warning]
speedcam_soundtype="2"
speedcam_soundtype_0="2"
speedcam_soundtype_1="2"
speedcam_soundtype_10="2"
speedcam_soundtype_11="2"
speedcam_soundtype_12="2"
speedcam_soundtype_13="2"
speedcam_soundtype_14="2"
speedcam_soundtype_15="2"
speedcam_soundtype_16="2"
speedcam_soundtype_17="2"
speedcam_soundtype_18="2"
speedcam_soundtype_19="2"
speedcam_soundtype_2="2"
speedcam_soundtype_20="2"
speedcam_soundtype_21="2"
speedcam_soundtype_22="2"
speedcam_soundtype_23="2"
speedcam_soundtype_24="2"
speedcam_soundtype_25="2"
speedcam_soundtype_26="2"
speedcam_soundtype_27="2"
speedcam_soundtype_28="2"
speedcam_soundtype_29="2"
speedcam_soundtype_3="2"
speedcam_soundtype_30="2"
speedcam_soundtype_31="2"
speedcam_soundtype_4="2"
speedcam_soundtype_5="2"
speedcam_soundtype_6="2"
speedcam_soundtype_7="2"
speedcam_soundtype_8="2"
speedcam_soundtype_9="2"
speedcam_visualtype="1"
speedcam_visualtype_0="1"
speedcam_visualtype_1="1"
speedcam_visualtype_10="1"
speedcam_visualtype_11="1"
speedcam_visualtype_12="1"
speedcam_visualtype_13="1"
speedcam_visualtype_14="1"
speedcam_visualtype_15="1"
speedcam_visualtype_16="1"
speedcam_visualtype_17="1"
speedcam_visualtype_18="1"
speedcam_visualtype_19="1"
speedcam_visualtype_2="1"
speedcam_visualtype_20="1"
speedcam_visualtype_21="1"
speedcam_visualtype_22="1"
speedcam_visualtype_23="1"
speedcam_visualtype_24="1"
speedcam_visualtype_25="1"
speedcam_visualtype_26="1"
speedcam_visualtype_27="1"
speedcam_visualtype_28="1"
speedcam_visualtype_29="1"
speedcam_visualtype_3="1"
speedcam_visualtype_30="1"
speedcam_visualtype_31="1"
speedcam_visualtype_4="1"
speedcam_visualtype_5="1"
speedcam_visualtype_6="1"
speedcam_visualtype_7="1"
speedcam_visualtype_8="1"
speedcam_visualtype_9="1"
speedcam_warning="1"
speedwarn_alt_tolerance="10000"
speedwarn_tolerance="10000"

[eauto]

Can you explain to me if this is already a sys entry? with a muted sound?

[mondo]

It is copied to the sys as it is. It is a minimum sound system setting for radar cameras. Not what you wanted?

[prodanu]

Just add tts voice, modify sys.txt to speak cameras

[sound]
ding=0
csv_voice_enabled=1
ding_muted=1