Instalare IGO Primo Full Europa pe Wince 6, 128MB RAM, rezolutia 480 x 272

Last updated on 1 year ago
coco77air
Membru incepator

Am si eu un GPS cu wince v6.0 si am tot incercat cu IGO Primo 2.2 FULL EU MULTILANG 2012 02 07 dar nu a fost chip sa fac dispozitivul meu sa porneasca. Mentionez ca are 128 RAM si suporta rezolutia 480 x 272. Mai jos am pus continutul fisierului SYS. In prinipiu vreau si eu ultima aparitie IGO Primo Full Europa cu meniul in limba Romana si vocea deasemeni sa fie in romana. Multumesc frumos si astept cu interes indicatiile voastre.



[folders]
has_secondary_root=0


[interface]
show_exit=1
extra_settings=1
show_tmc_config=1
show_tmc_eventlist=1
show_programs=1
show_minimize=1
mapfontscale=120
laneinfo_signpost_enabled=1
show_statustext=1
shutdown_time=0
recalc_voice=0
start_navigation_time=5
max_flag_distance_3d=3000

[loading]
show_statustext=1

[power]
powermgm_state=0

[other]
demo_enabled=0

[debug]
skip_eula=1
experimental_features=1
show_battery_percent=1
hnr=1
show_hnr=1
reserve_memory=1500000
cache=262144


[naviextras]
boot_service_address="http://zippy.naviextras.com/services/index/1"

[tmc-http]
servers.size=1
servers[0].url="http://zippy.naviextras.com/services/tmclite/data/nng-igo-tmc-iphone/0/"
enabled=1
start=1

[sound]
csv_voice_enabled=1
ding_muted=1
maneuver_chimes=0


[poi]
use_poi_mapping=5
use_multi_poi_mapping=0




[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1

[network]
available=1

[timezone]
patch_dst=1
sync_time=1
use_auto=1
sync_os_timezone=0
reset_os_timezone=0

[timezones]
use_timezone_setting_fix=1
use_new_timezone_ini=1
timezone_key="Time Zones"

[map]
3d_scale_carmodel=1
3dcarsizemin=9000
3dcarsizemax=15000
3dcarsizemul=80000
3d_max_tiltlevel=9000
3d_min_zoomlevel=20
poi_distant_distance=200
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0
poi_mapping=5
use_poi_mapping=5
max_poi_mapping=5
max_pois_on_horizont=5
show_pois=0
use_multi_poi_icon=0


[3d]
planned_route_contour_width=4
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0
fade_around_cursor=1
max_pois_on_horizont=5
max_poi_mapping=5
poi_mapping=5
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0


[route.histspeed]
enabled=1
show=1
use_timeslice=1

[route.histspeed.timeslice]
day=1
hour=8
minute=1

[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1


[gps]
source="nmea"
set_messages=0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[warning]
speedlimit_warning_visual=1
speedcam_warning=1
is_spoken=1
speedcam_max_lookahead=2000
speedcam_maxdistance_from_road=10

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Caution speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Caution mobile speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Caution traffic light camera"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,50:500,40:200,20:100"

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Caution average speed camera ahead"
;overspeed_spoken_type=1
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Caution traffic light ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Caution bus lane camera ahead"
;overspeed_spoken_type=1
warn_distances="110:1000,90:900,60:700,20:500"

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Caution dangerous railway crossing"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Caution scholl zone ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Caution town entry point"
;overspeed_spoken_type=1
warn_distances="0:2000"

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Intimidation radar"

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Caution toll ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Caution hospital"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Caution fire Station ahead"

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Change taxi zone"

[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Caution give way"
;overspeed_spoken_type=1
warn_distances="0:200"

[speedcam_category:17]
activated_spoken_type=speech
activated_speech="Caution dangerous crossing"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Caution speed breaker"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Caution Children ahead"
;overspeed_spoken_type=1
warn_distances="0:100"

[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Caution dangerous Turn"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Caution tunnel ahead open your lights"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:22]
activated_spoken_type=speech
activated_speech="Caution dangerous road ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Police department"

[speedcam_category:24]
activated_spoken_type=speech
activated_speech="Caution dangerous area"
;overspeed_spoken_type=1
warn_distances="0:800"

[speedcam_category:25]
activated_spoken_type=speech
activated_speech="Caution black spot"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:26]
activated_spoken_type=speech
activated_speech="Caution closed road"
;overspeed_spoken_type=1
warn_distances="0:300"

[speedcam_category:27]
activated_spoken_type=speech
activated_speech="Caution congestion ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:28]
activated_spoken_type=speech
activated_speech="Caution constriction ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:29]
activated_spoken_type=speech
activated_speech="Caution low visibility ahead"
;overspeed_spoken_type=1
warn_distances="0:1000"

[speedcam_category:30]
activated_spoken_type=speech
activated_speech="Caution low bridge ahead"
;overspeed_spoken_type=1
warn_distances="0:500"

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Caution dangerous point"
;overspeed_spoken_type=1
warn_distances="0:500"


[camera1]
maxdistance=500
minzoom2d=50
maxzoom2d=200
defaultzoom2d=300
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=45
defaultangle=80
angleoffset=65
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

[camera11]
maxdistance=500
minzoom2d=50
maxzoom2d=300
defaultzoom2d=400
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=50
defaultangle=80
angleoffset=43
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

20 posts

Gps_Admin
Super Administrator

?????
Cum adica nu ai reusit..SYS.TXT ala nu are nici o uiimportanta.
Mai bine spuneai cum si ce ai facut...
Igo Primo 2.2 e un fals..
gphg
Membru

e vorba de iGO Primo 2.2 International Edition by Zervdim Greece, in fapt este primo 2.0. Trebuie sters save si verificat utility.ini din folderul utility.
coco77air
Membru incepator

Pai si un link? Am cautat acum pe net si nu am gasit un link valid sa pot downloada ceea ce mi-ai recomandat. Multumesc.
coco77air
Membru incepator

Sau mai pe intelesul meu as vrea o recomandare ce versiune IGO Primo (as vrea eu ultima), care sa mearga pe dispozitivul meu, ma intereseaza full Europa si evident Romania detaliat cu tot ce se poate. Multumesc inca o data.
gphg
Membru

Gasesti in sectiunea ''download'' tot ce vrei!
Daca ne spui numele card-ului sau flash-ului o sa ai parte de indicatii mai precise, asa...
coco77air
Membru incepator

Cardul este un Micro SD HC Class 6, 16 Gb, aparatul a venit de nou cu un card micro sd SANDISK de 4 GB. Am verificat aparatul "vede" fara probleme cardul de 16 Gb, am pus pe el si video so mp3 si merge perfect, problema mea este cred eu de a gasii softul de navigatie compatibil cu cele expuse mai sus in posturile anterioare, asadar as vrea ca cineva avizat sa-mi spuna puctual ce am de facut, am vazut ca exista aici persoane foarte bine documentate si cu o buna experienta si informatii legate de acest subiect. Astept un ajutor de la voi. Multumesc din nou anticipat.
Andrei V
Super Administrator

Cel mai bine e sa lasi SYS.TXT cat mai gol posibil la prima utilizare. APoi, pe parcurs sa adaugi dupa preferinte anumite comenzi. In cazul in care la un momendat Primo nu va mai rula, vei stii ca ultimele linii adaugate sunt problema.
Recomand Primo 2.0 . Poti sa testezi kitul de aici:

Informatii vizibile doar membrilorAceste informatii pot fi vazute doar de membrii. Te rugam sa te Inregistrezi. Daca esti deja inregistrat pe acest site, te rugam sa te autentifici.
coco77air
Membru incepator

Este optimizat pentru ceea ce am eu, adiva wince 6?
gphg
Membru

Cum vezi tu cardul in aparat: Storage Card sau SDMMC, asa putem sa-ti indicam un kitt la care faci copy-paste, fara alte modificari. Am vazut ca esti incepator!
coco77air
Membru incepator

Acum am incercat recomandarea lui Andrei V, Primo 2.0 si nu merge. offff
coco77air
Membru incepator

Cardul meu este vazut de aparat ca SDMMC, acum am verificat si aspectul asta, da m-ar interesa ceva gen copy-paste cu toate ca o sa incerc sa si invat cum functioneaza totul. Din punct de vedere al spatiului nu este o problema cardul fiind de 16 Gb, deci pot "pune" acolo orice, oricat de mare ar fi ca si soft. cardul meu acum este liber in totalitate.
gphg
Membru

Informatii vizibile doar membrilorAceste informatii pot fi vazute doar de membrii. Te rugam sa te Inregistrezi. Daca esti deja inregistrat pe acest site, te rugam sa te autentifici.

Copy - paste, nu stergi nimic
mvvlad
Membru incepator

Quote

gphg a scris:

Informatii vizibile doar membrilorAceste informatii pot fi vazute doar de membrii. Te rugam sa te Inregistrezi. Daca esti deja inregistrat pe acest site, te rugam sa te autentifici.

Copy - paste, nu stergi nimic

Nu stiu daca ai mai auzit asta, dar eu simt nevoia sa iti spun ca ESTI GROZAV! Merci mult pt. link!
ovimiha
Membru incepator

Salut
Am si eu o pb asemanatoare. Postez aici sa nu mai umplu forumul.
Am un gps goclever 505 cu Windows ce. As fi vrut sa folosesc programul si hartile lui de la go clever dar nu le mai are instalate.
Asa ca am incercat sa pun igo.
Am gasit o varianta de aici de pe forum care merge, ver 2.
Programul porneste, am si harti in el, e instalat in memoria interna care e vazuta ca si SDMMC.
Problema e ca nu vede satelitii gps din igo, am stat si 30 de min si tot nimik.
In meniul aparatului am un gps test (in afara igo) si acolo gaseste o gramada de sateliti.
Imi pare ca e o pb cu legatura intre igo si driverul pt gps.

Ma poate ajuta cineva cu ceva info despre asta?

Multumesc
Andrei V
Super Administrator

Problema la tine este ca iGO nu stie valorile gps: Port si Baud ale receptorului gps.
Rezolvarea se face de obicei setand valorile exacte in fisierul sys.txt din pachetul iGO pe care l-ai instalat.

Poti sa incerci asta :
Code
[gps]
port=auto
baud=auto


Dupa ce pui chestia asta in sys.txt (sau modifici valorile deja existente acolo), stergi folderul Save si incerci sa vezi daca iti merge.
rcv64
Legenda

In primul rand trebuie sa lamurim cateva probleme:
-memoria interna poate fi vazuta ca,My Flash Disk,ResidentFlash, Nandflash,Dataflash in functie de aparat;
-cardul extern poate fi vazut ca SDMMC, Storage card ...etc.
Deci unde ai instalat pana la urma iGO 8?
Daca ai pus iGO 8, exista posibilitatea sa faci manual detectarea satelitilor.Deschizi iGO 8 apesi Meniu-Setari -mergi pe pagina 2-click pe GPS, debifezi GPS activat si in dreapta jos apesi Autodetectare.Dupa activare GPS valorile de la port si viteza le treci in Sys.txt

[gps]
set_messages=0
port=?
baud=?
ovimiha
Membru incepator

Am downloadat de aici gpszone.ro/infusions/pro_download_panel/download.php?did=651
Memoria interna e vazuta ca SDMMC stiu ca ar trebui sa fie cardul extern asa dar la aparatul asta e memoria interna.

Am rez pb stergant sys.txt si directorul Save.
Dupa repornitea aparatului m-a dus prin toate configurarile de la iGo si la final a mers.
Se pare ca a recunoscut postul si boud automat.

Merci
copocian
Membru incepator

Vreau sa achizitionez un Waiteq 960 hd, ce soft mi`
se recomanda si de unde-l pot descarca. Multumesc ! Smile
lusulica0109
Membru incepator

You can view all discussion threads in this forum.
You can start a new discussion thread in this forum.
You cannot reply in this discussion thread.
You cannot start on a poll in this forum.
You cannot upload attachments in this forum.
You cannot download attachments in this forum.
Users who participated in discussion:Andrei V, Gps_Admin, gphg, rcv64, mvvlad, coco77air, ovimiha, copocian, lusulica0109

Users Online Now

Guests Online: 10

Members Online: 3
ioan70, rudy70, octav

· Total Members: 149,750
· Newest Member: tarkanyi

Copyright © 2009-2016 GPS Zone RO.
Powered by PHP-Fusion Copyright © 2016 PHP-Fusion Inc
Released as free software without warranties under GNU Affero GPL v3.

Bootstrap Theme by PHP-Fusion Inc
63,812,117 unique visits